Publicité
Les langues disponibles
Les langues disponibles
7.5. Presentation of the different heating modes
Your spa may be used in 3 heating modes: Standard, Eco or Standby. These modes are
presented in the following sections:
Selection of one of the following heating modes is first made by pressing one of the
"High/Low" buttons. A small arrow then appears in the top left of the screen, which
indicates that the mode can be changed by pressing the "Mode" key within 3 seconds.
You can thus select the different modes. (Standard, Economy, Standby)
You will see appear on the screen: "Std" for Standard mode, "Ecn" for Economy mode
and "Slp" for Standby mode. It will be necessary to repeat the same operation each time
you wish to change the mode.
Standard mode is the normal operating mode of your spa. It is programmed to
permanently maintain your spa at the set temperature. You must activate this mode for
daily use of your spa. The temperature of the water is taken approximately every 30
minutes. The heater starts automatically each time the thermometer requests an
increase in temperature. (1°C below the set temperature)
The "Std" icon is temporarily displayed when this mode is selected.
7.5.1. Selection of the different heating modes
7.5.2. Presentation of standard mode
20
Publicité
