AQUALUX Orchidee Manuel D'instructions page 59

Economy mode enables you to heat the water of your spa to the set temperature only
during the filtration cycles. This is the mode you can use at night or during short periods
when the spa is not in use (example: Weekend...).
The water temperature is taken during each cycle. The heater starts at the same time as
filtration temps to maintain the water of your spa at the set temperature. The water
temperature may drop below the set temperature between cycles.
This mode enables you to maintain the set temperature during filtration cycles and not
to operate the heating permanently.
The "Ecn" icon is displayed when the set temperature is not reached, and alternates with
the set temperature once it is reached.
The "Standby" mode maintains the water temperature at 10°C below the set
temperature.
The water temperature is not taken during the filtration cycles. Heating is started
automatically, during filtration cycles only, when requested by the thermostat. It is
recommended to use this mode when the spa is not used for long periods (example:
winter, holidays away from home, etc...)
The "Slp" icon indicates that this mode is active. The icon is displayed whilst the water
temperature is below the set temperature, and flashes when it is not.
7.5.3. Presentation of economy mode
7.5.4. Presentation of Standby mode
21