Publicité
Les langues disponibles
Les langues disponibles
We advise you to use the SPAKIT treatment kit, which includes all the products you will
need for the start up, and regular maintenance of you spa. This kit comprises:
1 kg of disinfectant pellets
•
1l of preventive and curative algaecide disinfectant
•
25 cl anti-limescale/anti-sediment
•
25 cl anti-foaming agent
•
25 cl of palm milk fragrance perfume
•
You will also need a liquid or tablet analysis kit to measure the pH.
6.5. Role and installation of the isothermal cover
The isothermal cover provided with your Orchidée spa protects your spa from damage
that may be caused by prolonged exposure to sunlight, stops debris falling into your spa
when you are not using it, etc...
The cover has a very important protective role for the spa. By covering your spa you are
preserving its surface finish and conserving the heat of the water.
After adding the necessary chemical products at start-up wait at least one hour before
covering your spa.
During very hot periods, the cover may favour the development of algae.
If the spa is indoors, take the cover off.
•
If the spa is outdoors, so that the bath is not damaged by sunlight, leave the
•
cover on but raise it slightly away from 2 sides to enable the circulation of
air.
TACHPHL2: liquid, pellet or strip ph
chlorine analysis kit.
16
Publicité
