OneTouch Verio Flex Manuel D'utilisation page 21

Setting up your system
2
First time setup
To turn your meter on, press and hold
screen appears. Once the device is on, release
will now automatically prompt you to set the time and date.
The SET icon will appear on the screen to indicate that the
meter has entered setup mode.
Setting the time
Hour will flash
• If the hour displayed is correct,
press to confirm.
• If the hour displayed is not
correct, press
change the hour and press
to confirm.
Minutes will flash
• If the minutes displayed is
correct, press
• If the minutes displayed is not
correct, press
change the minutes and press
to confirm.
or to
to confirm.
or to
20
until the start-up
. The meter