OneTouch Verio Flex Manuel D'utilisation page 20

2 Setting up your system 2
Setting up your meter
Turn your meter on
To turn your meter on, press and
hold until the start-up test
screen appears. Once the device
is on, release . You can also
turn the meter on by inserting a
test strip.
Every time you turn your meter on, a start-up screen will
appear for a few seconds. All segments of the display should
appear briefly, indicating your meter is working properly. If the
meter does not power on, check the battery.
CAUTION:
If you see any missing segments within the start-up screen,
there may be a problem with the meter. Contact Customer
Care. Contact OneTouch Customer Care at 1 800 663-5521.
®
NOTE: If you turned the meter on for the first time by inserting
a test strip instead of pressing , you will not be able to
perform a glucose test until you complete the first time setup.
19