OneTouch Verio Flex Manuel D'utilisation page 51

Taking a test
3
Testing with control solution
Control solution testing precautions
OneTouch Verio
meter and test strips are working together properly and that
the test is performing correctly. (Control solution is available
separately.)
NOTE:
• Use only OneTouch Verio
OneTouch Verio Flex
• When you first open a new vial of control solution, record
the discard date on the vial label. Refer to the control
solution insert or vial label for instructions on determining
the discard date.
• Tightly close the cap on the control solution vial
immediately after use to avoid contamination or damage.
See page 29 for more information on testing.
Control Solution is used to check that the
®
®
Meter.
®
Control Solution with your
50