OneTouch Verio Flex Manuel D'utilisation page 77

Troubleshooting your system
8
What it means
The sample was applied before the
meter was ready.
What to do
Repeat the test with a new test strip. Apply a blood or control
solution sample only after the flashing
on the display. If this message continues to appear, contact
Customer Care. Contact OneTouch
1 800 663-5521.
What it means
One of the following may apply:
• Not enough blood or control
solution was applied or more was
added after the meter began to count down.
• The test strip may have been damaged or moved during
testing.
• The sample was improperly applied.
• There may be a problem with the meter.
What to do
Repeat the test with a new test strip; see page 40 or
page 53. If the error message appears again, contact
Customer Care. Contact OneTouch
1 800 663-5521.
symbol appears
Customer Care at
®
Customer Care at
®
76