OneTouch Verio Flex Manuel D'utilisation page 62

5 Editing Your Settings 5
Editing time and date
You can adjust the meter's time and date settings after first
time setup. Press and hold to turn the meter on, then
press and hold and at the same time. The SET screen
will appear, and the hour will flash.
For instructions on adjusting the time and date, see page 20.
After adjusting the settings, you will exit settings mode and
your last glucose result screen will appear. The adjusted time
and date will be displayed once a new glucose test has been
completed and the result appears on the screen.
NOTE: You will not be able to perform a blood glucose test
until you finish editing the time and date.
NOTE: The OneTouch Reveal
Mobile App on your compatible
®
wireless device checks and updates the time and date in your
meter each time you sync. Check the time and date often on
your compatible wireless device to be sure they are correct.
See the App instructions for more information.
61