OneTouch Verio Flex Manuel D'utilisation page 55

Taking a test
3
2. Touch the channel on the side of the test strip to the
control solution
3. Wait for the channel to
fill completely
Viewing your control solution result
After the control solution is applied,
the meter will count down until
the test is complete. Your result is
displayed along with the date, time,
unit of measure, and (for control
solution) and stored in the meter.
Control solution results can be seen when reviewing past
results on the meter.
CAUTION: Make sure you press and hold
or until
the control solution icon appears before you begin a
control solution test. Invalid results may be logged into your
history if you applied control solution to the test strip without
following the steps beginning on page 51.
54