OneTouch Verio Flex Manuel D'utilisation page 39

Taking a test
3
Preparing the meter
1. Insert a test strip to turn the
meter on
Insert a test strip into the test strip
port with the gold side of the test
strip and the two silver prongs
facing you.
NOTE: No separate step to code
the meter is required.
The flashing blood drop icon
( ) appears on the display.
You can now apply your
blood sample to the test strip.
Sampling blood from the fingertip
Choose a different puncture site each time you test. Repeated
punctures in the same spot may cause soreness and calluses.
Before testing, wash your hands and the sample site
with warm, soapy water. Rinse and dry completely.
Contaminants on the skin may affect results.
38