OneTouch Verio Flex Manuel D'utilisation page 30

Testing your blood glucose
Preparing for a blood glucose test
NOTE: Many people find it helpful to practice testing with
control solution before testing with blood for the first time.
See page 50.
Have these things ready when you test:
OneTouch Verio Flex
OneTouch Verio
Lancing device
Sterile lancets
NOTE:
• Use only OneTouch Verio
• Unlike some blood glucose meters, no separate step to
code your OneTouch Verio Flex
• Testing must be done within operating temperature range
(6-44°C).
• Make sure your meter and test strips are about the same
temperature before you test.
• Keep test strips in a cool, dry place between 5°C and 30°C.
• Do Not test if there is condensation (water build-up) on
your meter. Move your meter and test strips to a cool, dry
spot and wait for the meter surface to dry before testing.
• Do Not open the test strip vial until you are ready to
remove a test strip and perform a test. Use the test strip
immediately after removing it from the vial.
3
Meter
®
Test Strips
®
Test Strips.
®
29
Taking a test
System is required.
®
3