Safety Instructions And Danger Warnings - Animo M200W Mode D'emploi

Masquer les pouces Voir aussi pour M200W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety instructions and danger warnings

This appliance meets the mandatory safety regulations. Inexpert use can result in personal
injury and material damage. The following warnings and safety instructions must be observed
before using the coffee maker.
Instructions for use
Read these instructions for use carefully, before using this appliance.
This will protect your safety and prevent damage being caused to the appliance.
Perform the various actions in the order given.
Always keep this manual close by the appliance.
Installation
• Place the appliance at buffet height and on a firm, level base, in such a way that it can be
connected to the water supply and power supply.
• Connect the appliance to an earthed wall socket.
• Position the appliance in such a way that no damage can be caused if it leaks.
• Do not tilt the appliance, always position and move the appliance upright.
• The coffee maker is fitted with an overflow device that discharges at the bottom of the
appliance - take this into account when positioning the appliance.
• Water always remains in the heating system: for this reason the appliance must not be
placed in an area where the temperature can fall below freezing point.
• When installing the appliance, always observe the local rules and use approved materials
and parts.
• The 'Installation' chapter must again be followed when repositioning the appliance.
• Connect the appliance to the cold water mains.
Usage
• Inspect the appliance before using it and check it for damage.
• Never submerge or spray the appliance.
• Do not press the buttons with a sharp object.
• Protect the controls against dirt and grease.
• It is advisable to take the plug out of the socket and close the water tap if the appliance is
not going to be used for longer periods of time.
Maintenance and troubleshooting
• Observe the descaling intervals indicated by the descaling indicator light.
Overdue maintenance to the heating system can result in high repair costs and annulment
of the guarantee.
• Always follow the manufacturer's instructions when using the descaling agent.
• Do not leave the appliance unattended when maintenance is being performed.
• When descaling the appliance, it is advisable to wear safety glasses and protective gloves.
• Flush the appliance at least twice after descaling it.
Animo
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M202wMt200wMt202w

Table des Matières