MINN KOTA RIPTIDE TERROVA Manuel Du Propriétaire page 22

USING & ADJUSTING THE MOTOR
MOUNT FEATURES
Become familiar with the features of the motor to maximize the capabilities this product offers.
Depth Collar Knob Depth Collar Knob
Lift Assist Housing Lift Assist Housing
Depth Depth
Collar Collar
Shaft Shaft
Stow Deploy Lever Stow Deploy Lever
Depth Collar & Depth Collar Knob
The Depth Collar is located on the Shaft above the Lift Assist
Housing. It functions to hold the motor at the proper depth while
deployed. It also functions to hold the Lower Unit in place when
stowed while not in use and during transport. The Depth Collar
Knob is used to loosen and tighten the Depth Collar so that it can
be used to slide up and down the motor shaft.
Fall Away Ramps
The Fall Away Ramps hold the Lower Unit when the Motor is
stowed and rotate to release the Lower Unit as the unit is being
deployed. When the Stow Deploy Lever is pressed it unlocks the
position of the Fall Away Ramps and the Ramps rotate to guide
the Lower Unit back onto the mount when the motor is stowed.
Power Button
The Power button is located on the Indicator Panel on the
Mount. The Terrova must be manually powered "on" and "off."
When the Motor is powered "on," the Power Indicator will be
illuminated green when the Motor is powered "off," the Power
Indicator will not be illuminated
22 | minnkotamotors.com
Steering Housing Steering Housing
Indicator Panel Indicator Panel
.
Lift Assist Collar Lift Assist Collar
Fall Away Ramp Fall Away Ramp
AutoPilot AutoPilot
Power Power
Power Power
Button Button
Do not completely remove the Depth Collar Knob
NOTICE:
from the Depth Collar Assembly. Doing so allows a washer
shaped spacer to fall out of the Depth Collar. This spacer
plays a key role in creating tension for the Depth Collar to
clamp and function properly.
WARNING
When the motor is being transported, it is important to place
the Depth Collar snug against the Lift Assist Housing and
tighten. This provides a secure stow and holds the motor in
place during transportation when it is subject to high levels of
shock and vibration. Failure to secure the motor may result in
injury or damage to the unit.
WARNING
When stowing or deploying the motor, keep fingers clear of all
hinge and pivot points and all moving parts.
Lower Unit Lower Unit
Push-to-Test Push-to-Test
Battery Meter Battery Meter
©2022 Johnson Outdoors Marine Electronics, Inc.