Swegon TAC5F Manuel D'installation page 47

4.1.2.1 Wiring diagram
 TAC5 F circuit master
IN1 closed
(prewired)
 RC TAC5 master
IN1 open
Caution: Use gold-plated contact only
The use of this contact enables to switch automatically from RC TAC5 master to TAC5 F master.
Using this you can for instance:
Work in RC TAC5 master and switch in position TAC5 F master to stop automatically the fans
-
(attention, in this case the inputs K1/K2/K3 on the TAC5 F have to be disconnected from the
+12V).
Work in RC TAC5 master and switch in position TAC5 F master to activate automatically a sleep
-
value (attention K1/K2/K3 on the TAC5 F have to be properly connected to activate this value).
4.1.3 Switching from MANU to AUTO mode (scheduler)
_____________________________________________________________________________________
Although we put a lot of care in the making of our documentation, we cannot be held responsible for any error and/or
omissions that could have slipped in.
Push 4 seconds on the left push-
button to switch to another mode.
49