Alarm Table - Swegon TAC5F Manuel D'installation

Type 7: Alarm indicating maintenance is expected. (for configuration see "advanced setup):
SERVICE ALARM: indicates the fan operating time (in hours) has exceeded a certain limit set during
the configuration.
STOP FAN: indicates the fan operating time (in hours) has exceeded a certain limit set during the
configuration. This alarm stops the fans.
See 7 in table below.
Type 8: indicating a communication breakdown between the TAC5 F circuit and the RC TAC5.
This alarm indicates a communication problem between the 2 modules of the TAC5 F regulation. (only if
RC TAC5 option)
See 8 in table below.

3.3.1 Alarm Table

Type Display (1)
1 ALARM
FANx
2 PRESSURE
ALARM
3 ALARM
INIT Pa
4 ALARM
CA, LS, CPs or CPf
5 DATA
ERROR
6 FIRE
ALARM
7 ALARM
SERVICE
FAN STOP
SERVICE
8 CB COM
ERROR
Table 1 - Types d'alarmes
/ = no action
(1) Detailed text is displayed in successive screens.
(2) Unless the status has been changed in advanced setup to stop the fans.
(3) See details in §3.3.3.
Actions on the TAC5 F circuit
LED ALARM R1 Relay
ON Alarm Status
ON /
ON Alarm Status
ON /
ON Alarm Status
ON Alarm Status
ON Alarm Status
ON Alarm Status
/ /
42
Pressure Alarm Relay of
SAT3 (O.R.1 or O.R.2)
/
Closed
/
/
/
/
/
/
Action on
fans
Stopped
/
(2)
Stopped
/
Stopped
(3)
/
Stopped
/