Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If 2 independent Fans
21
LS on
For Time Slot 3, enter coefficient (%) applied to the base configured link for fan 1.
F1 000%
Select 000 to stop the fan, 100% to have the nominal set point.
22
LS on
For Time Slot 3, enter coefficient (%) applied to the base configured link for fan 2.
F2 000%
Select 000 to stop the fan, 100% to have the nominal set point.
23
TIME 4:
Enter Time Slot 4 starting time. If empty time slot is inactive.
--:--
If 1 fan
24
SET VAL.
For Time Slot 4, enter coefficient (%) applied to the base configured link for fan 1.
Select 000 to stop the fan, 100% to have the nominal set point.
LS 000%
If 2 dependent Fans
25
SET VAL.
For Time Slot 4, enter coefficient (%) applied to the base configured link for fan 1.
Select 000 to stop the fan, 100% to have the nominal set point.
LS 000%
26
For Time Slot 4, select airflow/torque ratio between fan 2 and 1.
%F2/F1
100 %
If 2 independent Fans
27
LS on
For Time Slot 4, enter coefficient (%) applied to the base configured link for fan 1.
F1 000%
Select 000 to stop the fan, 100% to have the nominal set point.
28
LS on
For Time Slot 4, enter coefficient (%) applied to the base configured link for fan 2.
F2 000%
Select 000 to stop the fan, 100% to have the nominal set point.
In CPs mode, menu items below are shown if TIME SEGMENT is set to Yes.
5
TIME 1:
Enter Time Slot 1 starting time. If empty time slot is inactive.
--:--
If 1 fan
6
SET VAL.
For Time Slot 1, enter coefficient (%) applied to the set point defined in the setup for fan 1.
Select 000 to stop the fan, 100% to have the nominal set point.
CPs 000%
If 2 dependent Fans
7
SET VAL.
For Time Slot 1, enter coefficient (%) applied to the set point defined in the setup for fan 1.
Select 000 to stop the fan, 100% to have the nominal set point.
CPs 000%
8
For Time Slot 1, select airflow/torque ratio between fan 2 and 1.
%F2/F1
100 %
If 2 independent Fans
9
CPs on
For Time Slot 1, enter coefficient (%) applied to the set point defined in the setup for fan 1.
F1 000%
Select 000 to stop the fan, 100% to have the nominal set point.
10
CPs on
For Time Slot 1, enter coefficient (%) applied to the set point defined in the setup for fan 2.
F2 000%
Select 000 to stop the fan, 100% to have the nominal set point.
11
TIME 2:
Enter Time Slot 2 starting time. If empty time slot is inactive.
--:--
If 1 fan
12
SET VAL.
For Time Slot 2, enter coefficient (%) applied to the set point defined in the setup for fan 1.
CPs 000%
Select 000 to stop the fan, 100% to have the nominal set point.
If 2 dependent Fans
13
SET VAL.
For Time Slot 2, enter coefficient (%) applied to the set point defined in the setup for fan 1.
Select 000 to stop the fan, 100% to have the nominal set point.
CPs 000%
14
For Time Slot 2, select airflow/torque ratio between fan 2 and 1.
%F2/F1
100 %
37
Publicité
Table des Matières
