Wiring To 1 Circuit With 2 Fans Whose Torques Are Independent - Swegon TAC5F Manuel D'installation

3.1.3.2.2.2

Wiring to 1 circuit with 2 fans whose torques are independent

3.1.3.2.2.3 Wiring to several circuits in parallel with, for each circuits, 1 fan or 2
fans whose torques are dependant
K1 closed  soft start
K1 open  soft stop
K2  0-10V signal for fan 1, maximum
impedance allowed: 1500 Ω
K3  0-10V signal for fan 2, maximum
impedance allowed: 1500 Ω
Caution: use gold-plated contacts only.
K1 closed  soft start
K1 open  soft stop
K2  0-10V signal, maximum impedance
allowed: 1500 Ω
K1+K3 closed  % on K3 activated
K3 open  % on K3 inactive
Caution: use gold-plated contacts only.
30