Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Remote Control (RC)
RC TAC5 – remote control with a LCD display (2x8 digits) is available with the TAC5 F regulation.
The SAT MODBUS option is compulsory to communicate with the remote control.
4.1 RC TAC5 – simple remote control with a LCD display (2x8 digits)
The display and the push-buttons from the TAC5 F circuit are remote to the RC. The RC also allows to
switch the fans ON/OFF, to select the airflow speed (OFF / I / II / III) and to switch from the automatic
mode to the common mode.
4.1.1 Connecting the RC TAC5 to the TAC5 F circuit
4.1.1.1
Open the RC TAC5 casing (access to the wiring slots)
Caution :
The RC box is class IP20 and cannot be installed outdoors as such. If you wish to install it
-
outdoors, you need to fasten inside a proper watertight box.
Using a small screwdriver unlock the 4 pins
2 pins on each side
Points for fixation of the casing
(spacing = 88mm).
RC dimensions = 122 x 66mm
RC TAC5 wiring terminals
46
Remove the cover
Publicité
Table des Matières
