Swegon TAC5F Manuel D'installation page 21

If INIT via PRESSURE: enter the pressure or voltage value
REF F1?
16
xxxx Pa
REF F2?
17
xxxx Pa
RESET
18
ALARMS?
END SETUP
19
3.1.2.4.2 Wiring Diagrams
3.1.2.4.2.1 Wiring to 1 circuit
3.1.2.4.2.2 Wiring to several circuits in parallel
Enter nominal pressure value for Fan1.
If # VENT=F1 + F2 and F2=%F1 = no. Enter nominal pressure value for Fan2.
Possibility to reset the alarms. Y or N?
The setup is then completed.
K1 closed  soft start
K1 open  soft stop
K1+K3 closed  % on K3 activated
K3 open  % on K3 inactive
Caution: use gold-plated contacts only.
K1 closed  soft start
K1 open  soft stop
K1+K3 closed  % on K3 activated
K3 open  % on K3 inactive
Caution: use gold-plated contacts only.
23