Before You Begin - Monogram ZET1P Manuel Du Propriétaire

Full
extension
oven racks
Upper
front rail
Lower
front rail
Front
rack lock
To avoid possible burns, place the racks in the
correct position before turning on the oven.
The correct rack position depends on the kind of
food and the browning desired.
The racks have a frame that locks into the rack
supports on both sides. Once the frame is locked
into place, always pull the rack out, by its upper
front rail, to its full extension stop position, when
placing or removing cookware.
To remove a rack:
1. Make sure the rack is pushed all the way into
the oven.
2. Grasp the rack by both its upper front rail and
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
Lift to unlock
front rack
locks from the
rack support
The oven
has 5 rack
positions
Rack frame
Rack
extended to
its full stop
position
Upper front
rack rail
Lower
front rail
Upper
front rail

Before You Begin

Wall Oven
3. Firmly holding onto both the upper and lower
front rack rails, pull the rack forward and
remove it from the oven.
Upper
front rail
To replace a rack:
1. Place the rack onto the rack supports (five
rack positions are available including the top
position).
2. Slide the rack all the way in until the rack
is secure under the rear rack supports and
press the front rack locks onto the front rack
supports. Slide the rack all the way out to
ensure that the rack is latched.
Rack secure under
rear supports
Slide the rack all the way in and push down to lock the front
rack locks onto the front rack supports
Lower
front
rail
Front
rack
lock
11