BEFORE YOU START
How to Remove Protective Shipping Film
and Packaging Tape
Carefully grasp a corner of the protective shipping film with
your fingers and slowly peel it from the appliance surface.
Do not use any sharp items to remove the film. Remove all
of the film before using the appliance for the first time.
To assure no damage is done to the finish of the product,
the safest way to remove the adhesive from packaging
tape on new appliances is an application of a household
liquid dishwashing detergent. Apply with a soft cloth and
allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
Parts and Accessories Included
The following parts and accessories are included for use
with this steam oven. NOTE: the solid pan, perforated pan
and lid, and set of deep pans and lids are designed for use
in the steam cook and steam reheat modes. Temperatures
above 300°F can damage this cookware.
4 Mounting Washers
4 Mounting Screws
Solid Pan
Oven Rack
Table Rack
Temperature Probe
and Probe Plug (not
shown)
6
Perforated Pan
with Lid
Reservoir with
Inlet Tube
Set of Deep
Pans and Lids
Conditioning the Oven
water and carefully rinsed.
for cooking and baking.
ensure you get the best results from the start. There
will be a distinctive smell and a small amount of smoke
during conditioning. This is normal, but make sure the
kitchen is well ventilated.
temperature. Use the Convection Bake function without
accessories in the oven.
them carefully with hot water, dishwashing liquid and a
soft cloth.
49-2000696 Rev.1