Safety
Work safety
➜
Always use the prescribed personal protective equipment (PPE) such as protective
clothing, safety goggles, protective gloves, safety shoes, etc.
➜
Do not operate any other devices in the immediate vicinity of the device ...
–
which can generate electromagnetic fields in the frequency range between
9 × 10
Hz to 3 × 10
3
–
which generate emission or radiation sources in the frequency range
3 × 10
Hz to 3 × 10
11
1,000 μm to 0,1 μm),
–
which generate ultrasonic or ionizing waves.
➜
Do not operate the unit when adiabatic compression or shock waves may occur
(pressure wave ignition).
➜
Do not process substances that could release energy in an uncontrolled manner
(exothermic reaction, spontaneous ignition).
Rectify malfunctions or faults on the device immediately.
Shut down the device and disconnect it from the power supply if it
is not possible to eliminate the disturbance or rectify the fault.
In such a case, contact the responsible technical service
department.
Personal protective equipment (PPE)
The operator must determine and provide the necessary PPE, depending on the respec-
tive application and the media and chemicals used.
The corresponding instruction of the personnel is solely within the operator's
responsibility.
Environmental protection
When processing environmentally hazardous substances, take appropriate measures to
avoid risks to the environment.
The evaluation of corresponding measures such as the marking of a hazardous area,
their implementation, and the training of the responsible personnel is the sole responsi-
bility of the operator!
Biohazard
When processing biohazardous substances, take appropriate measures to prevent
hazards to persons and the environment, including:
➜
Instruction of the personnel regarding the necessary safety measures.
➜
Provision of personal protective equipment (PPE) and instruction of the personnel in
its use.
➜
Marking of the device with a biohazard warning symbol.
The evaluation of corresponding measures such as the marking of a hazardous area,
their implementation, and the training of the responsible personnel is the sole responsi-
bility of the operator!
Hz,
11
Hz (in the optical spectral range wavelengths from
15
36