China Rohs Certification; General Notes; Basic Product Information; Guidelines Applied, Product Certification - Heidolph Hei-MIX Unimax 1010 Mode D'emploi

General notes

General notes

Basic product information

Guidelines applied, product certification

CE Marking
The device complies with the following standards:
•
•

California Residents

Important information for California residents regarding Prop 65. Please visit www.
P65Warnings.ca.gov for more information.

Residual risk

The device was designed and manufactured in accordance with the latest technical
standards at the time of development and the recognized safety regulations. During
installation and use, as well as during maintenance work, repairs and cleaning, there
are nevertheless certain residual risks associated with the device described.
These are identified and described at the appropriate points in this document.

Intended use

The platform shakers described in this document have been specially developed for the
following tasks:
– Shaking
– Mixing
– Emulsifying
– Suspending
– Separating
– Dissolving
– Staining
The areas of application of the platform shakers described include chemical, biological
and environmental-analytical laboratory and research applications, applications of basic
research and comparable facilities.
Due to its design, the device in its delivery condition may only be used in analytical
processes or in laboratory-like conditions in the food, cosmetics, and pharmaceutical
industries as well as other comparable industries that manufacture products intended
for consumption by humans or animals, or for use on humans or animals.
Any other use of this device is not considered as intended!

Reasonably foreseeable misuse

For use under conditions or for purposes deviating from the intended use, additional
measures may become necessary, and/or specific guidelines and safety regulations will
have to be observed (see section "Special hygiene measures for the use of labora-
tory equipment in food, cosmetics and pharmaceutical production" on page 37).
Corresponding requirements must be evaluated and observed by the operator in each
individual case.
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
33