Commissioning; Set Up The Device; Power Supply - Heidolph Hei-MIX Unimax 1010 Mode D'emploi

Commissioning

Commissioning

Set up the device

CAUTION
Material damage, loss of production
Improper installation of the device may result in direct and indirect
damage to property due to falling and/or spilling of fluids!
➜
➜
➜ Place the device in a suitable workplace.
➜ The working surface must be even and flat.
➜
The device must be freely accessible at all times.
➜ Ensure that a sufficient safety distance can be maintained to moving and/or hot
components.
The professional mounting and positioning of the device including
the supplied accessories is within the sole responsibility of the
operator!
Heidolph instruments accepts no responsibility for direct and/or
indirect personal injury or damage to property resulting from failure
to observe the instructions for the correct mounting and positioning
of the device.

Power supply

DANGER
Electric Shock
The device may only be supplied with the required mains voltage
via a grounded mains socket-outlet (voltage see rating plate).
IEC appliance inlet with fuse holder
The IEC appliance inlet and fuse holder are located on the back of the device (example:
Unimax 1010):
Observe the instructions for the correct positioning of the
device.
Observe the generally valid rules for the safe installation of
work equipment.
40