2.5.2
Specific information
► Caution Laser beam Class 2 laser. Do not look directly into the beam!
Do not look into the beams reflected by specular surfaces.
► Never touch the drill while the unit is connected to the power supply. Inadvertently starting the
unit can result in injury!
► Always keep long hair, loose or wide sleeves or other clothing away from the AUTO spin. Hair or
clothing can be pulled into and wrapped up on the grinding wheel, resulting in injury!
► Do not touch the rotating drill.
► Operation of the device only with the plate holder in place and plastic plate inserted.
Risk of injury from rotating drill.
► Do not reach under the drilling table during operation, risk of crushing.
► Do not grasp between the drill bit and the drill table during operation, risk of crushing. Risk of
injury from rotating drill.
2.6
Approved personnel
The appliance may only be operated and serviced by trained personnel�
Unit must not be used by persons with restricted physical, sensory or mental capabilities, or those lacking
the relevant operating experience�
Repairs that are not specified in these operating instructions should only be carried out by an electrician.
2.7
Liability Exclusion
Renfert GmbH is not liable for claims for compensation or claims under guarantee if:
► the product is used for purposes other than those stated in the operating instructions.
► the product is modified in any way – apart from modifications described in the operating instruc-
tions.
► the product has not been repaired by a specialist firm or original Renfert replacement parts have
not been used.
► there is continued use of the product despite obvious safety defects or damage.
► the product has been subjected to mechanical knocks or has been dropped.
- 5 -
en