Introduction; 1�1 Symbols Used; Safety; 2�1 Correct Use Of The Unit - Renfert AUTO spin Mode D'emploi

1

Introduction

1.1 Symbols used
This manual contains symbols also found on the appliance itself with the following meaning:
Danger
Immediate risk of injury. Consult accompanying documents!
Electrical current
This indicates a risk of injury due to electrical current.
Laser
Do not look into the laser beam.
Caution
Risk of damage to the unit if the instruction is not followed.
Notice
A general notice that improves and eases use.
The appliance complies with applicable EU directives.
This product complies with the relevant UK legislation.
See UKCA Declaration of Conformity in the Internet under www.renfert.com.
Within the EU, this device is subject to the provisions of the directive 2002/96/EC
(WEEE directive).
► List, special attention
• List
- List
⇒ Instruction / required action / entry / order of tasks:
You are prompted to perform the specified action in the given order.
♦ Result of an action / reaction of the device / reaction of the program:
The device or program responds to your action or because a particular event occurred�
Other symbols are explained when displayed�
2

Safety

2.1 Correct use of the unit
The device is a system component for the production of dental section models with a plastic plate as base
support�
The device is used to make conical holes in these plastic plates made of POM�
2.2 Unapproved Use
Only plastic plates made of POM may be used� The device is not suitable for drilling plastic plates of
PMMA (Plexiglas) or other materials�
The device is not suitable to drill in plaster�
The use of accessories (for ex� drill, plate holder, acrylic plates) supplied by other manufacturers may
lead to increased adjustment efforts�
- 3 -
en