Oregon PN2500N Mode D'emploi page 73

GB
Fig.24
ATTENTION to the possibility of the chain moving.
6) When you hear several strokes (the engine has ignited), press down the
check lever to the open position: .(Fig.25)
Fig.25
Note: Do not operate the throttle lever.
7) Continue to pull the starter handle until the engine starts.
8)Pull the chain brake lever towards the handles to release the chain brake
(Fig.26).
Fig.26
9) Using the palm of your hand, press the throttle trigger lock-out (fig.27 part.
1) and then press the throttle trigger (fig. 27part 2); this way "THE
THROTTLE ADVANCEMENT" will disengage and the engine will run at
minimum speed.
Fig.27
73