Oregon PN2500N Mode D'emploi page 64

A-weighted sound power level according to
ISO 22868.
A-weighted emission sound power level
according to noise directive 2000/14/EC
Vibration emission levels according to ISO
22867
Type of the engine
Type of the chain guide bar
Type of the chain
Type of carburetor
Type of spark plug
Fuel mixture ratio: petrol / engine oil
Petrol type
Engine oil type
Chain lubricating oil type
ASSEMBLY
Installing the guide bar and chain
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled
with damaged parts!
Do not start chain saw before fitting and adjusting the guide bar and
chain.
Wear safety gloves to carry out these operations. The (chain)
cutting teeth can cause injuries.
1) Unpack
a. Unpack all parts and lay them on a flat, stable surface as shown in fig.4.
Ensure that you have all the accessories and tools needed for assembly and
operation.
b. Check and make sure the delivery contents are complete and free of any
GB
L =110 dB(A) K=3,0 dB(A)
wA
L
a
front_hv,eq
a
rear_hv,eq
PN1E34F (air cooled, 2-stroke
Oregon：100SDEA041
Oregon: 91VG040X/91P040X
HUALONG（MC14B2P 16ZA）
LD L8RTF/NHSP,
L8RTF/BOSCH
Unleaded petrol with octane
number equal / higher than 95
2-stroke engine oil (JASO FC
GRADE OIL or ISO EGC
Special chain saw oil
64
= 113 dB(A)
wA,d
2
: 7,5 m/s K=1,5 m/s
2
: 7,5 m/s K=1,5 m/s
engine)
40:1
Ron
GRADE)
2
2