Oregon PN2500N Mode D'emploi page 60

Élagueuse thermique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
Fig. 1
Warning: RED Used to warn that an unsafe procedure
should not be performed.
WARNING
1. Avoid bar nose contact
2. Beware of kick back.
3. Do not attempt to hold saw with one hand (wherever
possible)
4. Hold saw properly with both hands.
DANGER! BEWARE OF KICKBACK!
Kickback may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinches
the saw chain in the cut.
Tip contact in some cases may cause a lightning fast
reverse reaction, kicking the guide bar up and back
towards the operator.
Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of
the saw which could result in serious personal injury.
Kickback is the result of tool misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below:
60

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Csp2525

Table des Matières