Bosch ACS 651 Notice Originale page 113

10. Press E.
 The following "Information" screen is displayed.
i
If the engine is not OK, select "No" and press E.
Execute the steps listed in chapter 6.13.8.
11. If the engine is OK, press E.
 The following screen is displayed.
12. If the A/C system is OK, press E. Execute the
steps listed in chapter 6.13.6.
i
If the A/C system is not OK, select "No" and
press E. Execute the steps listed in chapter
6.13.7.
Robert Bosch GmbH
Program description | ACS 651/751 | 113
6.13.6 Executing recovery when the engine and the
A/C system are OK
i
After executing step 12 of chapter 6.13.5, the follow-
ing screen is displayed.
1. Follow the instructions on the screen and press E.
 The following screen is displayed.
2. Follow the instruction on the screen and press E.
 The recovery phase is initiated.
i
After the oil drain is completed, the following
screen is displayed.
i
The recovery phase continues till the absolute pres-
sure is 600 mbar. When the recovery is completed,
it is possible to select and execute the other service
phases.
en
|
1 689 988 238 2012-11-06