Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Press the s or t key (3) to select the color : Orange (
(
), Blue (
(
)
5.
Press the MENU key (7). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6.
If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default Color is
2) ROGER BEEP
The Roger Beep sounds when the PTT switch (14) is released in
order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak
and to listen at the same time (as it is the case with a telephone).
Once someone had finished talking, he said "Roger" to let his
correspondent know that it was his turn to talk. The word "Roger"
has been replaced by a significant beep. Which is where the
words "Roger beep" originate from. When the function is active,
the icon
appears on the display.
1.
Long press the MENU key (7) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3.
Short press the MENU key (7) to validate. The current value blinks.
4.
Press the s or t key (3) to deactivate (OF), or select between
the 6 melodies for the ROGER BEEP from 01 to 06.
5.
Press the MENU key (7). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6.
If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is OF.
3) KEY BEEP
When the function is activated, a beep sounds when a key is
pressed, by changing the channel etc. "BP" appears on the
display when the function is active.
1.
Long press the MENU key (7) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3.
Short press the MENU key (7) to validate. The current value blinks.
), Cyan (
), Yellow (
(Orange).
17
), Purple (
) or Light Cyan
appears on
menu.
appears on
menu.
), Green
Publicité
Table des Matières
