PRESIDENT RANDY II FCC Manuel Du Propriétaire page 20

and exit the MENU. If the KEY BEEP function is activated, a long
beep sounds to confirm the success of the operation (see § KEY
BEEP page 17).
9. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Sensitivity : allows the adjustment of the microphone (original one
or optional vox) for an optimum transmission quality. Adjustable
level from 01 (high level) to 09 (low level). Default value: 02.
Anti-Vox : allows disabling the transmission generated by the
-
surrounding noise. The level is adjustable. OF (according the
squelch level) and from 00 (without anti-vox) to 09 (low level).
Default value: OF.
Delay time : allows avoiding the sudden cut of the transmission
-
by adding a delay at the end of speaking. The level is adjustable
from 0 1 (short delay) to 09 (long delay). Default value: 01.
VOX SETTING doesn't activate the VOX function.
8) DW (Dual Watch) SETTING
This function allows to customise the second channel scanned
by the DUAL WATCH function.
1. Long press the MENU key (7) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (7) to validate. The channel blinks.
4.
Press the s or t key (3) to select the new channel to be watch.
5. Short press the MENU key (7) to validate. The mode blinks.
6.
Press the s or t key (3) to select the modulation mode AM or
FM.
7. Press the MENU key (7). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
8. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default Dual Watch channel is channel 09.
9) SCAN SKIP
This function allows to memorize/erase a channel form the SCAN
SKIP memory.
1. Press the s or t key (3) to select the channel to be set.
2. Long press the MENU key (7) to enter the MENU.
the display.
20
appears on
menu.
appears on