PRESIDENT RANDY II FCC Manuel Du Propriétaire page 12

The scanning stops as soon as there is a busy channel. The scanning
automatically starts 5 seconds after the end of the transmission
and no key is activated during 5 seconds. The scan also restarts
in increasing order with the s key (3), or in decreasing order with
the t key (3).
When the SCAN function is activated, "SCAN" blinks on the
display.
CB channel scan
In CB mode (see § CB/WX page 11), the SCAN function scans
the 40 CB channels.
Weather channel scan
In WX mode (see § CB/WX page 11), the SCAN function scans
the 7 WX channels.
Note: The weather channel SCAN can run in the background
while using the unit in CB mode.
In the current mode, press the PTT switch (14) to deactivate the
SCAN function. "SCAN" disappears on the display.
SKIP
(long press only when the SCAN function is activated)
This function allows you to SKIP a channel found by the SCAN
function. When the scan stops on an unwanted channel, press
and hold the SCAN key (5) for 1 second to store this channel
in the SCAN SKIP memory. A beep sounds. The channel will no
longer be scanned.
Consult the menu SCAN SKIP on page 20.
DW (Dual Watch)
(long press)
Long press the DW key (5) to activate the DW function. Allows
to alternate between the active and a second (customizable)
channel. When the function is active, "DW" appears on the
display.
Press the PTT switch (14) to exit the DW function.
See menu DW (Dual Watch) SETTING page 20.
6) EMG ~ EMG SET
EMG
(short press)
Emergency channel is automatically selected by pressing the
EMG Key (6). First short press to call the first emergency customis-
able channel. Second short press to call the second emergency
12