Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- Accessories supplied
2)
TRANSMISSION
- Frequency allowance
- Carrier power
- Transmission interference
- Audio response
- Emitted power in the
adjacent channel
- Microphone sensitivity
- Drain
- Modulated signal distortion
3)
RECEPTION
- Maxi. sensitivity at 20 dB sinad
- Frequency response
- Adjacent channel selectivity
- Maximum audio power
- Squelch sensitivity
- Frequency image
rejection rate
- Intermediate frequency
rejection rate
- Drain
- Internal speaker
I) TROUBLE SHOOTING
1) YOUR CB RADIO WILL NOT TRANSMIT OR YOUR
TRANSMISSION IS OF POOR QUALITY
-
Check that the antenna is correctly connected.
-
Check that the SWR is properly adjusted (Mobile Configuration
only).
-
You are using the same modulation as your correspondent.
2) YOUR CB RADIO WILL NOT RECEIVE OR RECEPTION
IS POOR
-
Check that the squelch level is properly adjusted.
-
Check that the volume is set to a comfortable listening level.
-
Check that the antenna is correctly connected.
: See page 2
: +/- 200 Hz
: 4 W
: inferior to 4 nW (- 54 dBm)
: 300 Hz to 3 KHz
: inferior to 20 µW
: 6 mV
: 1,8 A (with modulation power Hi)
: 2 %
: AM: 0.5 µV - 113 dBm
FM: 0.3 µV - 116 dBm
WX: 0.3 µV - 116 dBm
: 300 Hz to 3 kHz
: 60 dB
: 1 W
: min: 0.2 µV - 120 dBm
max: 1 mV - 47 dBm
: 60 dB
: 70 dB
: see ECO MODE page 18
: 16 ohms, 1 W
25

Publicité

Table des Matières
loading

Table des Matières