Receiving Mode; Flashlight; Menu Setting - PRESIDENT RANDY II FCC Manuel Du Propriétaire

13) HI/LO TRANSMITTING POWER
Short press the HI/LO key (13) to alternate between high and
low transmitting power. "H" or "L" is displayed to indicate the
selected level. See ECO MODE page 18.
14) PTT SWITCH
Transmitting Mode
Press the PTT switch (14) to transmit. The LED (16) lights up red.

Receiving Mode

The LED (16) lights up green in receiving mode. You can hear the
signal on the speaker.
The bargraph indicates the emission (RF) or reception (S) level.
TOT (Time Out Timer)
If the PTT switch (14) is pressed longer than 3 minutes, the active
channel start blinking, the transmission ends.
The time-out tone will sound until the PTT switch (14) is released.

15) FLASHLIGHT

See § page 15.
16) LED
See § PTT SWITCH page 16.
6 + 8) KEY LOCK
Long press simultaneously the EMG (6) and MON (8) keys to
activate/deactivate the KEY LOCK function. When the function
is active, "
E) MENU SETTING
See § MENU page 13.
1) COLOR
1. Long press the MENU key (7) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (7) to validate. The current color blinks.
(PTT switch pressed)
(PTT switch released)
(EMG + MON keys)
" appears on the display.
16
(short press)
appears on
menu.