PRESIDENT RANDY II FCC Manuel Du Propriétaire page 19

6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is 0.
6) EMG SETTING
This function allows to customise both emergency channels.
1. Long press the MENU key (7) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (7) to validate. 1 blinks.
4.
Press the s or t key (3) to select the emergency to be 1 or 2.
5. Short press the MENU key (7) to validate. The current channel
blinks.
6.
Press s or t key (3) to select the channel.
7. Short press the MENU key (7) to validate. The current mode blinks.
8.
Press s or t key (3) to select the modulation mode AM or FM.
9. Press the MENU key (7). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
10. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
The default priority channels are channel 9 AM (1) and channel
19 AM (2). See § EMG SET page 13.
7) VOX SETTING
Three parameters allow to adjust the VOX function: Sensitivity:
/ Anti-vox level: / Vox delay time: .
1. Long press the MENU key (7) to enter the MENU.
the display.
2. Press the s or t key (3) to select the
3. Short press the MENU key (7) to validate. The current parameter
blinks ( , or ).
4a. Short press again the MENU key (7) to validate the parameter to
be set. The value of the parameter blinks or...
4b. Press s or t key (3) to select the next parameter. Short press the
MENU key (7) to validate.
5. Press the s or t key (3) to modify the value of the parameter.
6. Short press the MENU key (7) to validate. The current value of the
parameter stops blinking. The parameter is stored.
7. Repeat point 4 to 6 to adjust other parameters.
8. When all adjustments are done, press the MENU key (7). A short
press to validate and stay in the MENU or a long press to validate
19
appears on
menu.
appears on
menu.