PRESIDENT RANDY II FCC Manuel Du Propriétaire page 11

3) CHANNEL SELECTOR: t/s keys
- Press the t (3) button to decrease a channel.
- Press the s (3) button to increase a channel.
A "beep" sounds each time the channel changes, if the KEY
BEEP function is activated. See § KEY BEEP page 17.
4) CB/WX ~ ALERT
CB/WX
(short press)
Short press the CB/WX key (4) to alternate between CB or WX
(Weather Channel) mode. "WX" appears on the display if the
Weather Channel mode is active.
WX (Weather Channel) Mode
CB functions are not allowed in WX mode.
The WX mode allows you to hear weather informations. When
the mode is activated, use the s or t key (3) to move through
the 7 weather channels and find the active channel in your local
area. See table page 60.
The display shows the selected weather channel and if the unit
receives a signal,
ALERT
(long press)
This function only works in CB mode. It does not work in WX mode.
Press and hold the ALERT key (4) for 1 second to activate/deac-
tivate the ALERT function. When the function is ON and a tone is
detected at the selected weather channel, then the unit sounds
a "siren" alert. "ALERT" and the WX channel blink on the display.
The unit cancels CB mode and goes to WX mode.
While the "siren" sounds, press any key to stop the sound, "ALERT"
and the "WX channel" stop blinking on the display.
Note: The "siren" alert sounds when ALERT is detected in the
selected WEATHER channel only. Use first SCAN function in WX
mode (see § Weather channel scan page 12) for detect alerts
in all the weather channels.
5) SCAN ~ SKIP ~ DW
SCAN
(short press)
Short press the SCAN key (5) to activate the SCAN function. Press
the s key (3) to scan in increasing order. Press the t key (3) to
scan in decreasing order.
icon appears.
11