Dedicated Electrical Circuit with GFCI Protected Outlet
A dedicated GFCI protected electrical circuit is REQUIRED for all Memphis Wood Fire Grills and controller systems.
This circuit should be installed by a Certified Electrician. Although the Memphis Grill only uses about 2 amps of
current during startup, any other equipment (refrigerator, pool pump, fountains, etc.) that have high current draw,
consistently or intermittently, from the same electrical circuit can cause potential issues and/ or interruptions with the
performance of the grill. We recommend an on/off switch to be installed in this circuit so that the grill can be easily
disconnected from power when not in operation. This will prevent the buildup of interference that could affect the
controller's operation.
Built-In Installation
7