Memphis ITC 3 IntelliBurn Technology Elite Cart Mode D'emploi page 21

Operating Instructions: Memphis Wood Fire Grill
To start, press the "Initiate Startup Sequence" button on the Dashboard screen of display. The startup mode will
begin; pellets will begin falling into the burn pot and the igniter heats up. The startup mode is timed to last 25
minutes or until the appliance reaches a temperature above 165°F.
On the Grill Settings screen, use the slider or +/- buttons to set grill temp. If the grill is set to a temperature less than
300° it will run in Smoke Mode. If set to 300° or above it will run in Cook Mode. The Meat Probe can be set from 68°
to 250°. For more information on the use of the Meat Probe, consult pages 11 & 22.

Your grill will smoke for a few minutes while the pellets are lighting and coming to a full ignition. This typically
takes 3-4 minutes to occur.

If the startup temperature of 165°F is not reached within 25 minutes, the grill will then automatically shut off, and
an alarm will sound. If this happens, some unburned pellets will have built up in the burn pot. Before restarting
the fire, clean the excess pellets out of the burn pot and repeat the above steps.
Change Temperature Display Units
Your Memphis grill is capable of working in both Metric and English units. You can change display units using
either the grill display or the App. A change on one is automatically made to the display of the other.
To switch between Fahrenheit and Celsius on the ITC, navigate to the Setting Screen and select the F/C
switch. Selected units automatically save for future cooks. See page 14 Settings screen.
To switch between Fahrenheit and Celsius on the Memphis 3 app, navigate to the "Settings" gear (Top Right)
and select the desired units.
Automatic Startup
Notes
21