Memphis Itc Meat Probe - Memphis ITC 3 IntelliBurn Technology Elite Cart Mode D'emploi

The Memphis ITC Meat Probe, which comes standard with the Elite & Pro Memphis models, is a
must-have accessory for any griller. The ITC Meat Probe conveniently interfaces directly with your
grill's ITC control and provides an easy way to ensure your food is cooked to your predetermined
temperature. This feature ensures convenience and delicious, repeatable results—every time.
1. Plug the Meat Probe into one of three probe jacks, on the left side of the body of the grill, towards the back.
2. Turn the grill ON and set the grill temperature.
3. For each meat probe currently plugged into the ITC, the user can view the actual and set temperatures of the food on the
Dashboard screen along with the grill temperature. The probe set temperature can be adjusted from 68°F to 250°F via the
slider or +/- buttons on the Grill Settings screen.
4. Route the probe end through the probe gate in the grill's left side, just below the hood. The probe gate consists of a small
sliding gate that can be moved up and down from the inside of the unit. Pull the desired amount of cable into the grilling
area.
5. Insert the meat probe into the thickest portion of your
meat item.
6. Sit back and relax.
The grill will cook the meat until the meat reaches the
desired setpoint. The grill then automatically reduces to
its lowest setting(180°F / 80°C for all models), and
displays "Done". At any point during the cook, you can
modify the set temperature of both the meat probe and
the grill itself.
Keep the meat probe as clean and dry as possible. Clean with a damp sponge, or a cloth with a small
amount of rubbing alcohol. If exposed to liquids for extended periods of time, the meat probe may display
an erroneous reading. In extreme cases the ITC will constantly list the actual meat probe temperature as
"32°F" or "0°C". To remedy this, allow the probe cord to dry completely before using it again. Once dry, this
accessory may return to full functionality.

Memphis ITC Meat Probe

Meat Probe Care and Maintenance:
DO NOT submerge the meat probe when cleaning or place in dishwasher.
Caution!
When not in use DO NOT
leave the meat probe inside
the cooking chamber.
MEAT
PROBE
3.5mm Plug
23