Columbus McKinnon YaleERGO 360 Traduction De Mode D'emploi page 25

Usage of the ERGO-Lever
If the integrated handle at the lever should be used, it can be folded into the forward or
backward position. The handle will click into place with a clearly audible snapping sound. The
conical seating of the handle shall be free of dirt at all times. If necessary the seating has to be
cleaned just as well as the associated parts.
1.
To move the handle back into its starting position the handle has to be pulled forwards out of
its conical seating and simultaneously tilted back inside the lever.
surfaces of the handle should stay parallel to the slot inside the handle. The handle will be
held in its position by spring load.
Lifting the load
Pull the rerwardpawl rod lever along its axis backwards and tilt to position " ". Make sure that
the lever will click exactly into place.
Operate hand lever with pumping action. If work is stopped while the hoist is still under load,
the pawl rod lever must remain in the lifting position " ".
©
2018 Columbus McKinnon Industrial Products GmbH
CLICK CLICK K
2.
1. 2.
25
C CLICK CLICK
To do so the gripping