Selecting Print Option (Aprt); Setting Time (Time) - Seca 286 Mode D'emploi

Masquer les pouces Voir aussi pour 286:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 246

Selecting print option (APrt)

Setting time (tIME)

238 •
2. Select the "SYS" menu item from the "rF" submenu.
3. Confirm your selection.
The current setting is displayed
4. Select the desired setting:
– On
– Off
5. Confirm your selection.
You exit the menu automatically.
You can configure the measuring station so that the measured results are
automatically printed out on a wireless printer registered to the wireless
group.
NOTE:
This function is only accessible if a seca wireless printer has been
integrated in the wireless group via the "Learn" function.
1. Switch on the multifunctional display.
2. Select the "APrt' menu item from the "rF" submenu and confirm your
selection.
3. Depending on the print result you want, select the relevant setting for the
multifunctional display:
APrt multifunctional display
Weight
Height
Height, weight and BMI/BFR
Automatic printing deactivated
4. Confirm your selection.
You exit the menu automatically.
NOTE:
If the device APrt function and voice output are activated, the
announcement "Take your printed ticket" is made as soon as the
measured results are printed.
You can configure the system so that the wireless printer automatically adds
a date and time to your measured results. To do this, you have to set date
and time once on this device and transmit it to the internal clock of the
wireless printer.
NOTE:
This function is only accessible if a seca wireless printer has been
integrated in the wireless group via the "Learn" function.
1. Switch on the device.
2. Select the "tIME" menu item from the "rF" submenu.
3. Confirm your selection.
The current setting for "Year" (YEA) is displayed.
4. Set the correct year.
5. Confirm your selection.
6. Repeat steps 4. and 5. accordingly for "Month" (Mon), "Day" (dAY),
"Hour" (hour) and "Minute" (Min).
7. Confirm each of your selections.
After confirming the setting for "minute", you automatically exit the menu.
The settings are automatically transmitted to the wireless printer.
The wireless printer automatically adds a date and time to every printout.
NOTE:
Follow the Instructions for Use for the wireless printer for further
information about operating it.
Print result
MA
HI
HI_MA
Off

Publicité

Table des Matières
loading

Table des Matières