Selecting Print Option (Aprt); Setting The Time (Time) - Seca 727 Mode D'emploi Et Garantie

Selecting print option

Setting the time (Time)

1. Switch on the device.
2. Select the "ASEnd" menu item from submenu "rF"
and confirm your selection.
3. Select the setting "On" and confirm your selection.
You exit the menu automatically.
You can configure the device so that measured results
are automatically printed out by a wireless printer regis-
(APrt)
tered to the wireless group.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the device.
2. Select the menu item "APrt" in the "rF" submenu
and confirm your selection.
3. Select the appropriate setting for your combination
of devices:
– HI: measured results from length measuring
– MA: measured results from scales
– HI_MA: measured results from length meas-
– Off: no automatic printout, printout only if
4. Confirm your selection.
You exit the menu automatically.
You can configure the system so that the wireless
printer automatically adds the date and time to your
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the device.
2. Select the "tiME" menu item from the "rF" sub-
menu.
3. Confirm the selection.
The current selection for "year" (YEA) is displayed.
devices (not functional with this model)
uring devices and scales (not functional with
this model)
Enter key is held down during weighing.
The seca 360° wireless network • 71
English