Configuring Voice Output (Menu); Selecting Language (Lang); Setting Volume (Vol) - Seca 286 Mode D'emploi

5.4 Configuring voice output (menu)

Selecting language (LAng)

Setting volume (VOL)

226 •
In the menu you can configure voice output and the beeps if required.
*
..........
Voice Output
* Information on how to navigate in the multifunctional display menu can be
found on page 225.
You can select the language for voice output.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "LAng".
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
6. Confirm your selection.
You exit the menu automatically.
You can adjust the volume of voice output (0 = off, 100 = max.).
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "VOL".
4. Confirm your selection.
The current setting is displayed.
5. To change the setting or call up a different submenu, press the arrow key
(send/print) until the desired setting (in this case: volume "20") is dis-
played.
6. Confirm your selection.
You exit the menu automatically.
• DE
Language • EN (US/GB)
• ES (ES/ME)
Volume
1...100
• On
Results
• Off
• On
Print
• Off
•
Instructions
•
• PT
• FR • ID
• KO
• ZH
• TH • RU
On
Off