Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to Use
1
Age
5-19
5
6
7
8
BMI
(kg/m²)
32
30
28
26
24
22
20
18
16
14
12
5
6
7
8
* BMI-for-age percentiles.
Source: World Health Organization (WHO), 2007.
For more information please visit us at www.seca.com
Disinfecting the device
4.3 Transporting the device
4.4 Establishing power supply
Quick guide
The quick guide poster shows the patient the sequence of the measuring
operation.
►
High Accuracy
Ultrasonic Sensors
2
3
4
5
Age
Age
5-19
19+
Age
Age
(Completed Years)
(Completed Years)
9
10
11
12
13
14
15
16
17
18
19
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
BMI
BMI
(kg/m²)
(kg/m²)
32
32
30
30
30
97th*
97th*
28
28
26
85th*
26
85th*
25
24
24
22
22
50th*
50th*
20
20
15th*
18.5
15th*
18
18
3rd*
3rd*
16
16
14
14
12
12
9
10
11
12
13
14
15
16
17
18
19
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
:V\YJL! )40 JSHZZPÄJH[PVU HKHW[LK MYVT
WHO, 1995, WHO, 2000 and WHO, 2004.
►
The device is equipped with two casters to facilitate transport over short
distances.
1. Disconnect the power supply unit from the socket.
2. Tilt the device until it can be moved freely on the casters.
3. Transport the device to its new location.
4. Set the device in an upright position.
5. Plug the power supply unit into a power supply socket.
In order to achieve accurate measured results, the floor at the setup location
must be level and stable. Soft floors (wooden hallways, for example) give
under the patient's weight and falsify the measured result.
The device is powered by a power supply unit.
The connection for the power supply unit is located underneath the lower part
of the device. To establish the power supply, proceed as outlined below.
Place the "Quick guide to measuring" poster in a clearly visible location
close to the device.
Disinfect the following components before initial commissioning as
described in the section entitled "Disinfecting" on page 239:
– Column and multifunctional display
– Ultrasound head
– Column elements
CAUTION!
Risk of injury and damage to device
The device must be tilted for transport. The significant height of the
assembled device can lead to injuries and damage to the device.
►
Ensure that there is no-one else in the immediate vicinity.
►
Ensure that there are no objects in the immediate vicinity.
CAUTION!
Risk of injury and damage to device
The device must be tilted. The significant height of the assembled
device can lead to injuries and damage to the device.
►
Ensure that there is no-one else in the immediate vicinity.
►
Ensure that there are no objects in the immediate vicinity.
Before you really get started ... • 217
English
Publicité
Table des Matières
