Technical Data; Warranty Regulations - Migatronic AUTOMIG2 183i Manuel D'instruction

Masquer les pouces Voir aussi pour AUTOMIG2 183i:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
Power source:
Mains voltage (50Hz-60Hz)
Mains voltage (50Hz-60Hz)
1
Minimum short-circuit power Ssc
Fuse
Mains current, effective
Mains current, max.
Power, (100%)
Power, max
Open circuit power
Efficiency
Power factor
Current range
Duty cycle
100%
at 20°C
Duty cycle
40%
at 20°C
Duty cycle
100%
at 40°C
Duty cycle
60%
at 40°C
Duty cycle
max.
at 40°C
Open circuit voltage
2
Sphere of application
3
Protection class
Norm
Dimensions (hxwxl)
Weight
* Data for Boost-version are stated at 1x230V mains supply
Data in parenthesis are stated at 3x400V mains supply
**= Power save function. The machine will enter the power save function 7.5 minutes after finalising the welding operation

WARRANTY REGULATIONS

Migatronic welding machines are quality-tested continuously throughout the production process and undergo a
thorough, quality-assured final function test as assembled units.
The warranty period is 12 months for new welding machines if no registration is carried out. Upon registration of new
welding machines within 6 weeks from invoicing, the warranty period is extended to 24 months.
Registration must be made on the online address: www.migatronic.com/warranty. The certificate of registry is proof
of the registration and will be sent by e-mail. The original invoice and the certificate of registry will document to the
buyer that the welding machine falls within the scope of a 24 months warranty period.
If registration is not made, the standard warranty period is twelve months for new welding machines, as from the date
of invoicing to end user. The original invoice is documentation for the warranty period.
Migatronic provides warranty according to the warranty conditions in force through remedying defects in the welding
machines that can be proved to be caused by improper materials or workmanship in the warranty period.
As a main rule, warranty is not provided for welding hoses as they are considered to be wear parts; defects that occur
within 6 weeks after putting into operation and which are caused by improper materials or workmanship will, however,
be considered warranty claims.
All forms of transport in connection with a warranty claim fall outside the scope of Migatronic's warranty and will take
place for buyer's own account and risk.
We refer to Migatronic's warranty conditions at www.migatronic.com/warranty
1
This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data
in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
S
2
This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks
3
Equipment marked IP23 is designed for indoor and outdoor applications
4
Equipment marked IP23S is designed for indoor and outdoor applications.
All manuals and user guides at all-guides.com

TECHNICAL DATA

2
2
AUTOMIG
AUTOMIG
183i
223i/223i DUO
3x400V ±15%
3x400V ±15%
0,47MVA
10A
10A
4.4A
6.0A
7.5A
10.1A
3.1kVA
4.2kVA
5.2kVA
7.0kVA
15/10** W
20W
0,86
0.90
0,93
0.87
15-180A
15-220A
160A
180A
180A
220A
115A
145A
125A
170A
25%
30%
45V
52V
S
S
4
IP 23S
IP 23
66x38x79 cm
55x25x64 cm
96x57x87 cm (DUO)
26,2 kg
25 kg
54 kg (DUO)
2
AUTOMIG
Boost
AUTOMIG
223i/223i DUO
273i/273i DUO
3x230/400V ±15%
3x400V ±15%
1x230V
16A
10A
7.1A
7.6A
29.9A
13.2A
1.6kVA
5.3kVA
6.9kVA
9.1kVA
30W
20W
0.84
0.88
0.99
0.93
15-220A
15-270A
115A (140A)*
230A
150A (175A)*
245A
70A (88A)*
175A
86A (108A)*
195A
14% (16%)*
25%
52V
52V
S
S
IP 23
IP 23
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
55x25x64 cm
55x25x64 cm
96x57x87 cm (DUO)
96x57x87 cm (DUO)
27 kg
26 kg
56 kg (DUO)
55 kg (DUO)
24
2
2
AUTOMIG
Boost
273i/273i DUO
3x230/400V ±15%
1x230V
16A
10.5A
42.0A
2.4kVA
9.7kVA
30W
0.84
0.99
15-270A
150A (180A)*
180A (200A)*
107A (135A)*
130A (170A)*
18% (25%)*
52V
S
IP 23
55x25x64 cm
96x57x87 cm (DUO)
28 kg
57 kg (DUO)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Automig2 223iAutomig2 273iAutomig2 223i boostAutomig2 273i boostAutomig2 223i duoAutomig2 273i duo ... Afficher tout

Table des Matières