Technical Data / Maintenance - Migatronic DELTA 200 DC HP PFC Manuel D'instruction

All manuals and user guides at all-guides.com
TECHNICAL DATA
Power source :
200 DC HP PFC
Mains voltage (50Hz-60Hz) 1x230V -40/+10%
Fuse 16
Mains current, effective 13.4 A
Mains current, max. 26.8 A
Power, 100% 2.8 kVA
Power, max. 6.2 kVA
Open circuit power 550 W
Efficiency 0.8
Current range TIG 15-200 A
Current range MMA 15-180 A
Permitted load: MMA
100% (40°C ambient temp.) 100 A
60% (40°C ambient temp.) 130 A
40% (40°C ambient temp.) -
25% (40°C ambient temp.) 180 A
Open circuit voltage 70 V
Electrode diameter 1.6 – 3.25 mm
Extension cable min. 2.5 mm²
Slope down 0 – 10 sek.
Gas post-flow 0 – 30 sek.
TIG-ignition HF/LIFTIG
1 S
Application class
2
Protection class IP23S
Standards EN/IEC60974-1
EN/IEC60974-3
EN/IEC60974-10
Dimensions (LxWxH) 47x18x25 cm
Weight 11.8 kg
S
1
The machine meets the standards which are
demanded of machines working in areas where
there is an increased risk of electric shock
2
Equipment marked IP23S is designed for indoor
and outdoor applications
MAINTENANCE
The machine requires periodical maintenance
DELTA
and cleaning in order to avoid malfunction and
cancellation of the guarantee.
WARNING !
Only trained and qualified staff members
can carry out maintenance and cleaning.
The machine must be disconnected from
the mains supply (pull out the mains plug!).
Thereafter, wait around 5 minutes before
maintenance and repairing, as all capacitors
need to be discharged due to risk of shock.
Power source
TIG
- Clean the fan blades and the components in
140 A
the cooling pipe with clean, dry,
175 A
compressed air as required.
200 A
- A trained and qualified staff member must
carry out inspection and cleaning at least
once a year.
19