Technical Data - Migatronic SIGMA ONE 300 COMPACT Guide De L'utilisateur

Technical data

POWER SOURCE
Mains voltage ±15% (50-60Hz), V
Minimum generator size, kVA
Minimum short-circuit power, MVA
1)
Fuse, A
Mains current effective, A
Mains current max., A
Power 100%, kVA
Power max., kVA
Power open circuit, W
Efficiency, %
Power factor
Current range, A
Duty cycle 100% 20°C, A
Duty cycle max. 20°C, A/%/V
Duty cycle 100% 40°C, A/V
Duty cycle 60% 40°C, A/V
Duty cycle max. 40°C, A/%/V
Open circuit voltage, V
Sphere of application
2)
Protection class
3)
Standards, C
Standards, S
Dimensions C (HxWxL), mm
Dimensions S (HxWxL), mm
Weight C / S, kg
WIRE FEED UNIT MWF
Wire feed speed, m/min
Torch connection
Wire-reel diameter, mm
Wire spool, kg
Duty cycle 100 % 40°C, A
Duty cycle 60% 40°C, A
Duty cycle max. 40°C, A/%
Protection class
3)
Wire diameter, mm
Gas pressure, MPa (bar)
Dimensions (HxWxL), mm
Weight, kg
Standards
COOLING UNIT MCU 1300
Cooling efficiency (1 l/min), W
Cooling efficiency (1.5 l/min), W
Tank capacity, liter
Flow, bar - °C - l/min
Pressure max., bar
Standards
Dimension s (HxWxL), mm
Weight
1) This equipment complies with EN / IEC61000-3-12:2014 (/ 2011) provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated
data in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary,
that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) The machine is designed for indoor and outdoor use according to protection class IP23 / IP23S.
IP23S: The machine may be stored but is not intended to be used outside during precipitation unless sheltered.
300 400
3x400 3x400
16 27
3.7 6.0
16 20
11.0 17.5
15.4 26.0
9.0 12.1
10.7 18.0
30 30
85 85
0.90 0.90
MIG MMA MIG
15-300 15-250 15-400
290/28.5 250/30.0 345/31.5
400/65/34.0
220/25.0 220/28.8 300/29.0
240/26.0 230/29.2 370/32.5
300/25/29.0 250/40/30.0 400/50/34.0
50-60 65-70
S/CE S/CE
IP23S IP23
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
IEC60974-1. IEC60974-10 Cl. A
700x260x735 700x260x735
454x260x735 454x260x735
36.9 / 26 52 / 35
0.5-30.0
EURO
300
5-18
430
500
550/50
IP23
0.6-1.6
0.6 (6.0)
457x260x672.5
14.0
IEC60974-5,
IEC60974-10 CL. A
1300
1600
5
3.0-60-1.5
5
IEC60974-2.
IEC60974-10 CL.A
207x260x680
20
550
3x400
40
9.5
35
27.2
39.2
18.9
27.1
30
90
0.90
MMA MIG MMA
15-400 15-550 15-550
345/33.8 475/37.8 475/39.0
400/65/36.0 550/60/41.5 550/60/42.0
300/32.0 430/35.5 430/37.2
370/34.8 510/39.5 510/40.4
400/45/36.0 550/50/41.5 550/50/42.0
75-80
S/CE
IP23
700x260x735
454x260x735
53 / 36
21
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: SIGMA ONE
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN IEC60974-1:2018/A1:2019
EN IEC60974-2:2019
EN IEC60974-5:2019
EN / IEC60974-10:2014/A1:2015
Regulation: 2019/1784/EU
Issued in Fjerritslev 10.02.2021
Kristian M. Madsen
CEO