Removing / Inserting The Battery; Use As A Vacuum Cleaner; Accessories; Attaching And Removing A Nozzle / Suction Tube - Cleanmaxx FOL- 818 Mode D'emploi

EN
• With wall mounting bracket: Connect
the charger cable to a plug socket
and insert the main unit (17) into the
wall mounting bracket (16).
The charge control lamp (34) flashes red
during charging.
L
The device cannot be switched on
while it is charging.
When the charge control lamp lights up
green, the battery is fully charged.

Removing / Inserting the Battery

• Removing: Press the release but-
ton (40) on the battery and pull it off
the main unit (17).
• Inserting: Slide the battery onto the
rail beneath the handle (33) until you
hear it engage.
USE AS A VACUUM
CLEANER

Accessories

The vacuum cleaner includes:
• Main unit (17) as a motor with bat-
tery (1), dust container (2) and HEPA
filter
• Suction tube (4) for cleaning floors or
as an extension for the nozzles
• Floor nozzle (9) for the dry cleaning of
floors. It has a rotating brush (28) and
LEDs (30) which illuminate the floor
while operating.
• Brush nozzle (7) for all uneven ob-
jects, furniture, upholstery etc.
• 2 in 1 crevice nozzle (5) is a crevice
nozzle with a brush attachment.
○ When this is slid onto the end of
the crevice nozzle (Picture I), this
creates a narrow brush nozzle for
dusting delicate objects such as
picture frames, lamp shades, key-
boards etc.
22
04350_Inlay_de-en-fr-nl_A5_V1_1.indb 22 04350_Inlay_de-en-fr-nl_A5_V1_1.indb 22
○ Press the release button on the
brush attachment and slide it back
to turn the narrow brush nozzle into
a crevice nozzle. The crevice nozzle
is suitable for upholstery and for all
nooks and crannies that cannot be
reached with other nozzles.
• Nozzle holder (6) for storing 2 nozzles
(Picture A).
Attaching and Removing a Nozzle /
Suction Tube
• Attaching: Plug a nozzle into the
suction opening (38) until you hear it
engage (Picture H). The suction tube
is plugged between the suction open-
ing and the nozzle (Picture G).
• Removing: Press the release button
(39) on the suction opening or the
suction tube and pull off the nozzle /
suction tube.

Inserting the HEPA Filter

The process of removing and inserting
the HEPA filter is described in "Cleaning
the Device", "HEPA Filter".

Vacuuming

Please Note!
■
When the device is used as a vacuum
cleaner, do not suck up any liquids
or wet substances (e.g. wet carpet
shampoo).
■
Note the MAX marking on the dust
container and empty it as soon as it
is reached to prevent the motor from
being overloaded (see the "Cleaning
the Device" chapter – "Dust Contain-
er"). Also clean the HEPA filter regu-
larly (see the "Cleaning the Device"
chapter – "HEPA Filter").
1. Make sure that the HEPA filter and the
battery are inserted in the main unit.
07.05.2020 15:50:45 07.05.2020 15:50:45