Use As A Wet Cleaner; Accessories; Assembling; Taking Apart - Cleanmaxx FOL- 818 Mode D'emploi

2. Plug one nozzle with or without the
suction tube into the suction opening
of the main unit as required.
3. Press the ON / OFF button (31) to
switch on the device. The operating
lamps (48) switch on.
L
If only one operating lamp is
flashing, the battery is weak
and needs to be charged (see
the "Charging Up the Battery"
chapter).
4. The device has two power levels. You
can press the switch (32) to increase
or reduce the power as required.
5. Guide the nozzle over the surface to
be cleaned.
6. After vacuuming, switch off the device
using the ON / OFF button.
7. Empty and clean the dust contain-
er (see the "Cleaning the Device"
chapter) and charge up the battery
(see the "Charging Up the Battery"
chapter).

USE AS A WET CLEANER

Accessories

The wet cleaner includes:
• Main unit (17) as a motor with bat-
tery (1), dust container (2) and HEPA
filter
• Intermediate piece (3)
• Bottom and top dirty water tank (14,
15)
• Wet cleaning nozzle (8)
• Fresh water tank (12)
• Mop roller (10)
• Suction nozzle (11)
• Cleaning cloth (24)
04350_Inlay_de-en-fr-nl_A5_V1_1.indb 23 04350_Inlay_de-en-fr-nl_A5_V1_1.indb 23

Assembling

(Picture A)
All connections must be heard to engage
in place when assembling.
1. Plug together the two dirty water
tanks.
2. Insert the bottom dirty water tank
into the mount of the wet clean-
ing nozzle. Make sure it is aligned
correctly! The contacts of the wet
cleaning nozzle must be plugged into
the socket on the bottom of the tank.
When pressing together, press on the
two locking lugs (42) of the dirty water
tank.
3. Plug the intermediate piece into the
top dirty water tank.
4. Plug the suction opening (38) of the
main unit (battery and HEPA filter
must be inserted!) into the intermedi-
ate piece.

Taking Apart

• To disconnect the wet cleaning nozzle
from the dirty water tank, press the
two locking lugs and pull off the dirty
water tank.
• With all other connections, press the
respective release buttons (43, 44, 45)
and separate the parts.

Wet Cleaning Nozzle

For operation, the mop roller with suction
nozzle, the cleaning cloth and a filled
fresh water tank must be inserted in the
wet cleaning nozzle.
• The cleaning cloth is fixed by means
of hook and loop fasteners on the
bottom of the wet cleaning nozzle
(Picture B).
• Attach / detach the mop roller: Turn
over the wet cleaning nozzle so that
the bottom is pointing upwards. Slide
the catch (23) away from the mop
roller. It can then be taken out. Slide
EN
23
07.05.2020 15:50:45 07.05.2020 15:50:45